O | ղ | “ϵ҂
 
| ˾śr | „ | | ˲Ƹ | ھ | | “ϵ҂
  
  “ϵ҂
C늹OV޹˾
]䣺 sales@jushemenye.com
ַ ³Dž^·Է@101Ԫ1F184
 
    늄-Һ
ɫɫӰԺ,һAVѸ_һþۺϾ_һDVD,Ծ
rg2019-03-09  Դjushemenye.com

    1ҺיzcSo

    ҺҪȫ_ÑҪ󣬳OӋͼӹ⣬߀ҼcҪ_ʹúͶھSo͸ʹǰҪŚ⣬_{yҪ{λãɫɫӰԺ,һAVѸ_һþۺϾ_һDVD,Ծ坍Ҫڙz飬͸ϵĻ҉m]ˮ1ܷęzcSoܷǷֹҺ׃йҪԪ For the lip seal should focus on the inspection of whether there are scars and wear on the lip, for the combination of seals should focus on the inspection of the wear of the sealing surface, and then determine whether the seal can be used.

  • (1)
  • In addition, it is necessary to check whether the static sealing ring between the piston and the piston rod is extruded.Uܷ⑪czܷ֧ЭhĥprҼlFܷ֧͌ЭhȱݣҺܷĽYʽxͬYʽm˲|ܷMиQ@޶ȵؽܷcܷ֮gĤȣpܷй©

        Һ׸ͲȱcܷҺ׃йҪأͲȮavۣʹQµĻܷ⣬ҲЧųϣͲȱҪzߴɫɫӰԺ,һAVѸ_һþۺϾ_һDVD,ԾպλǷM㼼gҪПovۣKyv۵ȣԱȡĽQͲ΢׃κ͜\ەrÏĥˇޏ͸Ͳ

  • (2)
  • ĥˇޏͱԭ2.5ԃȵĸͲͨ^ĥCߴΠ`IJλMĥʹͲwߴ硢ΠʹֲڶȝM㼼gҪ󡣸Ͳȱĥpأ^vەrՌMМyLɌIaSͲ칤ˇaMиQҲ\TS311pĥaޏ͸ͲTS311pĥaҪ춌ĥpޏ͡ޏ^УúϽεڻ1mm

        Degree of the groove, groove surface, and then clean with acetone with cylinder inner contour plate put the TS311 antifriction repairing adhesive coat in good polished surface, forcibly leveling, ensure the compaction, and higher than the cylinder inner surface, after being solidified, leave allowance for finish grinding, at last, by grinding the cylinder has met the requirement of the overall size, shape, tolerance and roughness. But this repair cylinder life and reliability are not high.

  • (3)
  •     Ucg\Ӹ©ҪأUtĥpavەrֱӌܷʧЧˣczUֲڶȺλǷM㼼gҪUУֱ_Ҫ򰴌MМyLɌIaSM졣ɫɫӰԺ,һAVѸ_һþۺϾ_һDVD,Ծ僌ĥpֲɲȡĥȥ僌ӣtӹ̎ˇ

        y_Һףcz龏_yyоcyĥprҼlFĥpӴܷʧЧMиQҲ\ĥMyоcyĥMޏ͡

     

    УC늹VO޹˾VO䣬ҺףãX݆ã[ãҺICP1280761̖
    g֧֣on“ |վͼ